Lubricants ,Cleaners,Add.  >  Oil  >  Synmax


CLICK TO ENLARGE
 
SynMax - Break-In Oil 10W45
Part #: 052181045

$34.49 
Qty: 

SynMax™ 10W45 Break-In Petroleum Motor Oil Applications:

• Sold per Gallon
• 3 Gallons per Case

Applications:

• UNIVERSAL FOR ALL ENGINE BREAK-IN 4 CYCLE ENGINE APPLICATIONS Small & Large size (Liter or Cubic Inches) Racing – Automotive - Commercial

• RECOMMENDED BY ENGINE BUILDER SAE 30 OR 15W40+ Motor Oil
• SPECIFIC USE - ONLY FOR ENGINE BREAK-IN PROCEDURES NOT INTENDED FOR RACING OR LONG TERM PERFORMANCE USE.

• PROTECTS: CAM SHAFT & CAM SURFACES
• PROTECTS: LIFTER SURFACES (SOLID – FLAT - ROLLER - HYDRAULIC)
• PROTECTS: ENGINE METAL & BEARING SURFACES (Steel, Aluminum & All Alloys)
• PROTECTS: NEEDLE BEARINGS IN ROLLER VALE PARTS OR TURBO-CHARGER
• IMPROVES: PISTON RING / CYLINDER WALL & CAM SHAFT/ LIFTER MATING
4 CYCLE ENGINE APPLICATION INCLUDE BUT NOT LIMTED TO:
• Standard V-8 289 to 500+ CI Racing Engines with Solid or Roller LIFER including but not restricted to: “Crate or Series Specification”; NASCAR Old or New Design Race Engines for: Cup, Busch or Truck Series including: Chevrolet, Ford, Dodge or Toyota. All performance for Gas or Alcohol including: Sprint, Midget, Off-Road Dirt and others.
• Sportscars; USA; European; Japanese, Korean , etc. 4, 6 & 8 Cylinder Natural & Turbo. 1.0L, 1.50L. 2.0L 2.5L; 3.0L; 3.5L: 4.0L etc. Gasoline, Diesel, Alcohol & Natural Gases.
• Historic or Vintage USA or European (older design) rebuild or restored to original spec. NOTE: could be used for Vintage – Historic applications for daily use (non-performance)
• Motorcycle Including: Harley Davidson, Yamaha, Honda, Suzuki, BMW, Rotax etc.
• Kart Engines including: Briggs & Stratton Racing / Vanguard; Rotax etc.

• BREAK-IN OIL PRODUCT DATA:

• 100% Premium Petroleum product
• High Zinc / ZDDP levels for extreme duty requirements
• Does not require any additional additives.
• Superior protection for flat tappet & cams, lifters and moving parts
• Increased compression within the cylinder ring / wall mating areas to for improved horsepower performance.
• Reduced detergency allows proper break in procedure.
• Metal surfaces are safely smoothed of irregularities.
• Foreign objects and contaminates held within the oil are trapped within oil filter and flushed away at hot drain completion.
• Break-in procedure increases service life because the micron metal particles are not floating around to cause long term damage.

• Not intended for racing use only break-in time.

• Oil Operation Temperatures: 200°F to 225°F
• Upon Break-In completion – Use SynMax Racing Motor Oil for Race Applications.





RELATED ITEMS


SynMax - Synthetic Racing Oil 5W30

SynMax - Break-In Gear Lube 80W90

SynMax - Synthetic Power Steering Fluid

Synmax 99007 - Water Kooler

SynMax - Synthetic EP Gear Lube 75w90

SynMax - Synthetic Blend Racing Oil 20W50

Synmax - Super 90 Synthetic Gear Lube

SynMax - Gladiator 1000 Racing Wheel Bearing and CV Axle Grease

SynMax - Synthetic EP Gear Lube 75w140

SynMax 99008 - Water Kooler Premix

SynMax - Super 70 Manual Transmission Lube

SynMax - Synthetic Racing Oil 15W40

SynMax - Synthetic Racing OIl 15W50

Lefthander Chassis, Inc.
13750 Metric Rd. Roscoe, IL 61073
Phone (815) 389-9999   Fax (800) 779-6461
Return/Refund Policy - Privacy Policy
Office Hours:
8:30am - 5:00pm CST
Counter Hours:
Mon-Fri 9:00am 5:30pm CST