LHC 6632 MSD 6632 - 6 HVC Professional Racing Ignition With Soft Touch Rev Control

Ignition > Ignition Box

CLICK TO ENLARGE

MSD 6632 - 6 HVC Professional Racing Ignition With Soft Touch Rev Control
Part #: 0186632

$588.95

Qty:

Professional race teams have been relying on the power and endurance of our 6 HVC Ignition Control and will be excited to see the addition of a rev limiter! The 6 HVC-L Ignition has a built-in rev limiter that will save the engine from overrev damaged caused by spins, missed shifts or driver misfortune. This means there is no need to mount an external rev control (i.e., less wiring and reduced weight)! The advanced component design and circuitry of the 6 HVC Ignitions produce incredible voltage with high current output. Internally there is an efficient heat sync, solid component mounting and it’s all encased in a clear epoxy. The rpm limit is adjustable with plug-in modules and the wiring is routed into NASCAR approved Deutsch style MSD connectors.

Features
•Multiple spark, capacitive discharge ignition control
•Designed for professional racing applications that demand high rpm for long periods of time
•Clear epoxy potting compound for vibration protection and clear base plate for easy tech inspection
•Deutsch connector, mandatory for NASCAR use
•Multiple sparks for 20 degrees of crankshaft rotation
•Accepts breaker points, amplifier and magnetic pickup trigger inputs
•550 primary voltage output to coil
•150 millijoules per spark up to 15,000 RPM
•Works on 12 - 18 volt electrical system
•Built-in reverse polarity protection circuit
•Must be used with HVC Coil PN 8250
•No programming loops
•Supplied with rubber shock mounts
•No CARB Exemption Order Number

OPERATING SPECIFICATIONS
Spark Energy: 150 mJ/spark
Primary Voltage: 550 Volts
Secondary Voltage: 40,000 Volts
Spark Series Duration: 20 degree Crankshaft Rotation
RPM Range: 15,000 RPM with 14.4 Volts
Voltage Required: 12-18 Volts, Negative Ground
Current Draw: .7 Amp Per 1,000 RPM
Weight and Size 5.1 lbs.,8"L x 4"W x 2.25"H

6632 Instructions