ULTRA - Adjustable Low Friction Ball Joint w/ +1.5" Longer Stud - Upper Screw In
Part #: 0016200150ADJ
$51.49
Our NEW adjustable ball joints are the newest edition to the ULTRA low friction ball joints. These ball joints can be taken apart for cleaning and maintenance. They feature a low profile design for more clearance to the wheel. The also have a gun drilled ball which not only makes it lighter, it allows a larger amount of grease. The ball is cross drilled for the grease to evenly distribute to the walls of the ball joint housing. The Ball/Stud is designed to automotive standards to the stud will bend before it breaks.
• NOT FOR STREET USE - Off road use only • Screw-In • Taper fits upper eye on tubular spindle • High Quality - affordably priced • Small or big tires - car raised or lowered, these ball joints will get the desired angles back where they need to be • 32° Swing angle to allow Maximum suspension travel • Weighs 1.2 LBS
• Same stud taper as 081-1162 or Moog K-772 • Same small thread as 081-1162 or Moog K-772 • 001-6200 Replaces 081-1162, Moog K-772, TRW 10162, Howe 22320 or Afco 20034LF • Thread O.D. of 1.830"
NOTE: To adjust simply tighten the cap until all end play is gone. Then back off 1/8 of a turn. Make sure to always reinstall the slotted washer and screws.